| Item Name and Picture |
Description |
Pricing |
Punch Former and Radius Dresser
|
Center hight 3"
Index division 24, every15 degree and tolerace plus, minus 10 ceconds
V-Block capacity: 1-1/4"
Spindle TIR: .0001"
Spindle parallel to the base: .0001" in 4"
Two adjustable arcing stops
Graduation 360 degree
Comes with radius dressing attachment
|
|
Sine Plate
|
Two precision ground rails are included
Size: 6 x 6 x 2"
Center distance 5" within .0002"
0 - 60 Degree adjustable
Minut angle step .200" built into front roll for very small angle setting
Hardened to RC56 - 60 and precision ground
|
|
Fine Pole Magnetic Chucks
|
Features:
Use Rare Earth Ceramic Magnets inside for superior holding power
Fine ploes: 1/8" Poles, 1/16" Separators
Sealed aginst dirt and liquids
1-5/8" very low profile to allow Max. work height clearance
Flat and parallel within .0002"
Precision ground rails are included
|
|
Fine Pole Magnetic Sine Plate
|
Features
Angle seting accuracy: within 10 seconds
0 - 60 Degree adjustable angles
Roll distance : 5" within .0002"
Use Rare Earth Ceramic Magnets inside for superior holding power
Fine poles magnetic chuck: 1/8" poles, 1/16" separators
Minut angle step .200" built into front gage block roll
Size: 6" x 6" x 3.5"
Sealed against dirt and liquids.
A removable handle and two precision ground rails are included
|
|
Sine Dresser
|
Features:
Cross feed up to 50mm
Center distance 50mm whin 0.01mm accuracy
Dresses grinding wheel to any angle from 0 to 60 Degree
|
|
Visi-Dress Radius Dresser
|
2 Year Warranty
Specifications:
Center Hight........................................2.56"
Max. Grinding Wheel...............................8"
Convex Radius......................................1/2"
Concave Radius.......................................1"
Tangential Travel...................................0.89"
Dressing Angle .......95 Deg. - 0 Deg.- 95 Deg.
|
|
Magnetic Trans V-Block
|
Features
V-Block
1-7/8" x 2-3/8" x 4-3/8"
Large V Cap.: 2" Round
Small V Cap.: 1/2" Round
|
|
Magnetic Trans Chuck Parallels Set
|
One Matched Pair 1" x 2" x 4"
Precision Ground All Over
Features
|
|
Magnetic Trans V-Block Set
|
1-7/8" x 2-3/8" x 2" ---
Large V Cap.: 2" Round ---
Small V Cap.: 1/2" Round
|
|
Diamond Flaring Cup Wheels - Type D11V9
|
100 Concentration
150 Grit
For tool & Cutter Grinding
Center Hole:1-1/4"
|
|
6" Diamond Grinding Wheels - Type D6A2C
|
140 Concentration
1-1/4" Center Hole
Can be used on Badlor, Delta, Black & Decker... bench or pedistal grinders
|
|
Dish Style Diamond Wheel - Type D15V9
|
Specifications
Mounting Hole: 1-1/4"
Angle : 45 Degree
Diameter: 6"
100 Concentration
150 Grit
|
|
Straight Style Diamond Wheels - Type D1A1
|
100% Concentration, 150 Grit
Features
Applications includes slot grinding, cutting tool flute grinding, die sharpening and O.D. tool grindinging
Use for grinding tungsten carbide, ceramics, glass, etc.
|
|
Demagnetizer
|
Size: 8" x 6"
Effetively removes residual magnetism from dies, cutters, punches, etc.
110V, single phase power
|
|