CDCO Machinery Corp.
1129 Tower Rd.
Schaumburg, IL 60173
Tel: (800) 417-2305    (847) 592-6130
Fax: (888) 731-8949    (847)592-6131
Email: cdco@cdcotools.com
Category : Milling Machine Tooling
Item Name and Picture Description Pricing
Steel Parallels


Features
  • Parallel within 0.0002" and 0.0002" to size in height
  • Made of high quality alloy steel
  • 58-63 HRC hardness
  • 6" in length
  • 10 Pairs in 1/8" set
  • 9 Pairs in 1/4" set


  • Size Item No. Price  
    1/8" 10 Pairs   37201 $28.00
    1/4" 9 Pairs   37205 $46.00
    Ultra Thin Parallel 1/32" Thick - 20 Pairs Set


    Features:
  • 20 Pairs in set, 1/2" to 1- 1/16" by 16th in height
  • All are 6" long and 1/32" thick
  • Parallel within 0.0001" and 0.0001" to size in heigh
  • Made of high grade alloy steel and hardened to Rc 50


  • Item No. Price  
    37207 $37.00
    Wavy Parallel Set


  • 9 pairs ranging from 1/2 - 1-1/2" in 1/8 heigh increments
  • Size in height and parallelism .0002"
  • Made of high quality spring steel, hardened, stress relleved and precision ground


  • Item No. Price  
    37401 $29.00
    Adjustable Parallels


    Features:
  • Parallel sizes: 3/8-1/2, 1/2-11/16, 11/16-15/16, 15/16-1.5/16, 1.5/16-1.3/4, 1.3/4-2.1/4


  • Item No. Price  
    37101 $35.00
    Block Set


    Features:
  • Supplied in pairs
  • Precision ground
  • Squareness of all sides is within .0002"
  • Heat treated and hardened to RC55-60


  • Name Item No. Price  
    1-2-3   35500 $12.00
    2-4-6   35600 $69.00
    Angle Blocks


    Features:
  • Oil-hardened Steel, Precision ground
  • Size 3" long x 1/4 thick
  • Accuracy 0.0001" per inch
  • 1 degree increments to 5 degrees - 5 degree increments to 30 degrees


  • Item No. Price  
    35116 $25.00
    17 Pc Precision Angle Block Set


    Features:
  • Get quick set-up for grinding various angles from 1/4 to 45 dgrees . Just load on vise and rest the workpiece at any angle you choose. Eliminates time wasted dressing an angle in a grinding wheel.
  • Set includes: 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 35, 40, 45 degree blocks and 2 riser blocks


  • Item No. Price  
    35102 $68.00
    Solid Angle Plates


    Features:
  • 1/4" thick, four holes 11/31"
  • Precision ground
  • Hardened steel


  • Item No. Price  
    35115 $12.00
    Edge Finder


    Features:
  • Body: 0.375"
  • Contact: 0.200"
  • All parts are hardened and ground to precision tolerance.
  • For quickly locating working edges, shoulders, grooves, center points and scribed lines.


  • Item No. Price  
    60601 $5.00
    Wiggler Center Finder Set

    SET INCLUDES: Vinyl case. Ball contact attachment: .250" diameter Disc contact attachment: .100" diameter Off-set indicator holder. Needle point attachment. Shank.
    Features:
  • For accurately locating working points on drill presses, milling and other machines.
  • The original snap-in ball and socket wiggler.


  • Item No. Price  
    60603 $8.00
    Power Feed


    Features
  • Fits many popular vertical mills
  • Automatic shut-off at end of cut
  • Continuously varialbe 3/4" - 25" / Minute feed rate
  • Rapid traverse push button
  • 35" / Minute rapid traverse
  • Easy installation


  • Feed Item No. Price  
    X Feed 135Lbs.   22201 $325.00
    X Feed 150Lbs.   22301 $338.00
    Y Feed 150Lbs.   22202 $358.00
    Z Feed 150Lbs.   22203 $358.00
    Power Feed For Bench Type Mill Drill Machines


    Features
  • Variable Working Speed : 0 - 165 RPM
  • Fast Overid Speed: 240 RPM
  • Uses 110V, Single Phase Power


  • Item No. Price  
    22204 $358.00
    Power Feed Replacement Plastic Gear


    Features
  • Plastic gear
  • Suitable for all type of our power feed unit


  • Item No. Price  
    22206 $28.00
    Work Stop


    Features:
  • Fits all milling vises
  • 1" wide with 2 steel guide pins for positive clamping.
  • Mounts quickly, with one socket head cap screw.


  • Item No. Price  
    21382 $3.00
    Quill Stop


    Features:
  • Quick action clip.
  • Easily installed, quickly moved.
  • Clips on quill easily for rapid depth setting.
  • Top or bottom positioning.
  • .020" fine adjustment.


  • Item No. Price  
    21381 $7.00
    Mill Stop


    Features:
  • Base dimension: 2" x 4-1/2"
  • 1/2" hole for T-slot mounting, 3/8" diameter rod.
  • Overall height: 7"


  • Item No. Price  
    21380 $14.00
    58 PC. Clamping Kits

    5/8" T-nut, 1/2" Stud
    Features :
  • All the blocks, bolts, nuts and hold-downs are case hardened
  • Each set includes: 24 Studs, 6 T-nuts, 4 Coupling Nuts, 6 Step Clamps, 6 Flanged Nuts, 12 Steel Step Blocks


  • T Nut Stud Threads Item No. Price  
    5/8"   1/2" x 13   24801 $52.00
    1/2"   3/8" x 16   24803 $48.00
    7/16"   3/8" x16   24802 $48.00
    T - Slot Nuts




    Table Slot Thread Item No. Price  
    5/8   1/2 - 13   24806 $2.00
    7/16   3/8 - 16   24807 $2.00
    1/2   3/8 - 16   24808 $2.00
    5C Spin Index Fixture


    Features
  • 10 Vernier holes for 1° indexing
  • Indexing plate with precise 36 hole pattern
  • Accepts 5C collets
  • Designed to use on surface grinders drill presses and all types of milling machines


  • Item No. Price  
    23010 $48.00
    Horizontal/Vertical 5C Angle Collet Fixture


    Features
  • Cam lever opens and closes collets
  • For drilling, Milling, Grinding, tapping, etc.
  • Can be mounted and used horizontally and vertically
  • Base 5" x 3-5/8"


  • Item No. Price  
    23012 $43.00
    Horizontal/Vertical 5C Collet Index


    Features
  • Precision ground and hardened nose spindle
  • Using 5C collets
  • Lever collet closer for fast collet opening and closing


  • Item No. Price  
    23011 $189.00
    Tilt Tables


    Features
  • Range 45° on each side
  • Perfect for setting work at any angle during milling or other operations
  • 3 T-slots 5/8"


  • Table Size Height T-Slot Item No. Price  
    5" x 7"   3-3/4   1/2   21173 $68.00
    7" x 10"   5-1/2   1/2   21174 $109.00
    Precision Milling Machine Vise


    Features
  • With Swivel Base
  • Removeable hinged handle for fast locking
  • Provides better clamping pressure


  • Jaw Width Jaw Opening Item No. Price  
    4"   4-1/8"   21003 $98.00
    6"   5-1/2"   21002 $169.00
    V-Jaw (For 6" milling vise)

    Hardend to RC58-62, precision ground.


    Item No. Price  
    21109 $45.00
    Step Jaws (For 6" Milling Vise)


    Features
  • Hardened to RC58 - 62 and precision ground
  • Ledge Width: 0.10"
  • Hole Distance: 3.875"
  • Hole to Bottom: 0.937"


  • Item No. Price  
    21118 $27.00
    Precision CNC Machine Vise

    Specifications: Jaw Width - 6", Total Height - 5" Max. opening - 5-7/8", Overall length - 17.5" Net Weight - 67 lbs.
    Features
  • Features a thrust bearing that increases clamping power by 80%
  • Can be mounted upright or sideways
  • Excellent to use when you have multiple vise setups


  • Item No. Price  
    21030 $149.00
    Speed Handle (For milling vise)


    Features:
  • 3/4" Hex. hub
  • Move the vise jaw much more fast


  • Item No. Price  
    21108 $15.00
    Rotary Tables (Horizontal & Vertical)


    Features:
  • 1/2" T slots
  • 6 " Tatale has a MT2 Center Hole
  • 8" Table has a MT3 Center Hole
  • The table is graduated a full 360 degrees


  • Dia. Height OAL Horiz. Center Height Vertical Center Hole Item No. Price  
    6"   3.2"   3.9"   MT2   22001 $179.00
    Dividing Plate


    Features:
  • #22007 is for 6" table, #22006 is for 8" table
  • It allows you to divide a circle into any number of divisions from 2 to 66, plus all numbers of divisions evenly divisible by 2, 3, and 5 from 68 to 132 divisions, plus many others between 133 and 360 divisions.


  • Item No. Price  
    22007 (for 6\" Table $82.00
    22006 (for 8\" Table $98.00
    Bridgeport Drawbar


    Features:
  • Made from cold rolled steel.
  • 20-1/4" Length
  • 7/16"-20 thread.
  • Black oxide plated.
  • O-ring design prevents spacer from falling into the head during installation.


  • Item No. Price  
    91005 $16.00
    R8 Stub Milling Arbors




    Dia. Shoulder to Nut Item No. Price  
    1"   2"   25336 $32.00
    1-1/4"   2"   25337 $35.00
    R8 Shank End Mill Holders

    Hardened & Ground ? Drawbar End Type


    Size Item No. Price  
    3/8   25302 $15.00
    1/2   25303 $16.00
    5/8   25304 $17.00
    3/4   25305 $19.00
    7/8   25306 $19.00
    1"   25307 $22.00
    1-1/4   25308 $25.00
    1-1/2   25309 $29.00
    3/8 - 1-1/2 8PC Set   25330 $155.00
    MT3 Shank End Mill Holders


    Features:
  • MT3 Shank with 1/2" X 13 drawbar hole


  • Size Item No. Price  
    1/4   23235 $15.00
    3/8   23225 $15.00
    1/2   23226 $15.00
    3/4   23228 $18.00
    1/4 - 3/4 4PC Set   23200 $59.00
    R8 to Morse Taper Adaptors




    R8 (O.D.) MT (I.D.) Item No. Price  
    R8 to MT2   29991 $14.00
    R8 to MT3   29992 $16.00
    Machinists' Jack


    Features:
  • 1" adjustment
  • 250 Lbs weight capacity


  • PC Item No. Price  
    1 Pc   29529 $6.00
    3 Pc Set   29530 $17.00
    Sloted Angle Plates (Webbed)


    Features:
  • Precision ground
  • Square and parallel within 0.001" per 6"


  • Size Item No. Price  
    4-1/2 x 3-1/2 x 3   24451 $22.00
    6 x 5 x 4-1/2   24452 $28.00
    8 x 6 x 5   24453 $42.00
    10 x 8 x 6   24454 $56.00
    Sloted Angle Plates (Open End)


    Features:
  • Precision ground
  • Square and parallel within 0.001" per 6"


  • Size Item No. Price  
    4-1/2 x 3-1/2 x 3   24461 $22.00
    6 x 5 x 4-1/2   24462 $28.00
    8 x 6 x 5   24463 $42.00
    Angle Plates


    Features:
  • Ground finish
  • Square and parallel within 0.0005" on two machined faces


  • Size Item No. Price  
    3 x 3 x 3   24202 $17.00
    4 x 4 x 4   24203 $22.00
    6 x 6 x 6   24205 $34.00


    Go Back to Home